Panasonic PV-GS19 사용자 설명서

With a PC

Note on the driver name displayed

The driver name displayed will differ depending on
your OS, operating environment and the mode of the
Camcorder.

Windows XP/2000:

• When the Camcorder is in PC Mode:
[USB Mass Storage Device] or [Matshita DVC USB
Device]

Windows Me:

• When the Camcorder is in PC Mode:
[USB Disk] or [Matshita DVC]
• Some OS, such as Windows 98SE, may not show

the icon indicating that you may safely disconnect
in task tray. (OS may be set not to show) Make sure
Camcorder’s Card Access lamp is off and disconnect
the cable. Also, with Windows Me, the icon will not
be displayed when in Tape Recording Mode or Tape
Playback Mode.

CAUTION:
If you disconnect the USB Cable while the
Card Access Lamp is on, it may damage the
Card data.

• You can safely disconnect the cable.

Select [USB Mass Storage Device] and click

[Stop].

Verify [Matshita DVC USB Device] is

selected and click [OK].

Removing the USB Cable safely for
Macintosh

If the above operation is not performed correctly, when
data is copied from the personal computer to an SD
Memory Card, the copied data may be damaged.

Even when the following operations are performed,
the same results will occur as when the USB Cable is
removed (above). Therefore, it is imperative that the
above operation

is completed before proceeding.

Drop the [NO_NAME] icon which appeared

when you connected the Camcorder with the
USB Cable into the recycle bin, then disconnect
the USB Cable.

• When Camcorder power is turned OFF.

• When SD Memory Card is removed.

For Macintosh

• When Mode Dial is turned to change modes.

This feature can be used only if both parties are
using the same operating system. Please see
chart below.

[Send]

[Receive]

[Software]

Windows XP

ĸ OK ĺ Windows XP

Windows
Messenger

Windows XP

ĸ NG ĺ

Windows
98SE/Me/2000

Windows
98SE/
Me/2000

ĸ OK ĺ

Windows
98SE/Me/2000

MSN
Messenger

Using as a Web Camera

If the Camcorder is connected to your personal
computer, you can send video and sound from the
Camcorder to the other parties via the network.
• Do not connect the USB Cable until the Video

Stream Driver is installed.

OS:
(PV-GS35 Only)

IBM PC/AT compatible personal computer with
preinstalled;
Microsoft Windows XP Home Edition/Professional
(With this version of Windows XP, SP1 or later is
needed.)
Microsoft Windows 2000 Professional SP4 or later
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition

(For PV-GS19/PV-GS31)

IBM PC/AT compatible personal computer with
preinstalled;
Microsoft Windows XP Home Edition/Professional
(With this version of Windows XP, SP2 or later is
needed.)
Microsoft Windows 2000 Professional SP4 or later
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition

Operating environment