Panasonic HX-DC3 사용자 설명서

다운로드
페이지 163
- 145 -
This unit cannot be 
operated though it 
is turned on.
This unit does not 
operate normally.
≥ Remove the battery or AC adaptor, wait 
about 1 minute and then reconnect the 
battery or AC adaptor. Then about 1 minute 
later, turn on the unit again. (Conducting the 
above operation while the media is being 
accessed may damage the data on the 
media.)
≥ If normal operation is still not restored, 
detach the power connected, and contact 
consumer support.
A blinking high 
temperature 
warning icon 
 
is shown, and the 
unit does not turn 
on.
≥ The battery temperature or unit internal 
temperature (excluding battery) rises. Wait 
for the temperature to drop before using the 
unit again.
“ERROR 
OCCURRED. 
PLEASE TURN 
UNIT OFF, THEN 
TURN ON AGAIN.” 
is displayed.
≥ Check each of the following items.
j Remove the SD card from the device and 
reinsert.
j Remove the battery and then put it in 
again.
j Change the SD card and check.
≥ If a message is still displayed after checking 
the above, detach the power connected, 
contact consumer support.
Power
Problem
Check points