Panasonic DMC-FT4/DMC-TS4 VQT4E30 F0212MG0 사용자 설명서

∫ Example of adjusting the altitude manually

Set [ON] in [Adjust] in [Altimeter] on the ground A, and 
then set the altimeter to 0 m (0 feet).

Move from the ground A to the roof B.

Check the altitude measured on the roof B.

A Ground
B Roof
C Height of building 

(relative altitude)

•

When [Adjust] is set to [GPS], the altitude prior to and after recording 

can vary according to the timing at which GPS data is received.

•

Adjustment is not possible when the measured value exceeds the display range. It will display 

[----].

•

With the displaying of the relative altitude, it may display with negative numbers even if it is 

higher than sea level depending on the value adjusted with [Adjust] in [Altimeter].

•

After adjustment, errors of a few metres may still occur. For information on preserving the 

adjusted accuracy, read