Panasonic DMC-FT4/DMC-TS4 VQT4E30 F0212MG0 사용자 설명서

[Memory card error. 
This card cannot be used in this camera. 
Format this card?]
•

It is a format that cannot be used with this unit.

> Insert a different card.

> Format the card again with the camera after saving necessary data on a PC etc. 

Data will be deleted.

[Please turn camera off and then on again]/[System Error]
•

This message will be displayed when the lens did not operate properly.

> Turn the camera off and on. If the message persists, contact the dealer or your nearest 

Service Centre.

> Use a card compatible with this unit. 

–

SD Memory Card (8 MB to 2 GB)

–

SDHC Memory Card (4 GB to 32 GB)

–

SDXC Memory Card (48 GB, 64 GB)

[Insert SD card again]/[Try another card]
•

An error has occurred accessing the card.

> Insert the card again.

> Insert a different card.

[Read Error/Write Error 
Please check the card]
•

It has failed to read or write data.

> Remove the card after turning the power off. Insert the card again, turn the power on, and 

try to read or write the data again.

•

The card may be broken.

> Insert a different card.

[Motion recording was cancelled due to the limitation of the writing speed of the 
card]
•

Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.

•

In the event that it stops even after using a “Class 4” card or higher, the data writing speed has 

deteriorated so it is recommended to make a backup and then format 

•

Depending on the type of the card, Motion Picture Recording may stop in the middle.