Panasonic DMC-LX100 사용자 설명서

다운로드
페이지 332
178
SQW0021
Stabilizer, Zoom and Flash
Taking pictures using the flash (supplied)
How to use the flash effectively
Taking a picture using the flash with the subject too close may cause overexposure. 
When you set [Highlight] in the [Custom] menu to [ON], the overexposed areas will flash 
black and white during [Auto Review] or playback. If that happens, we recommend taking 
the picture again, for example, after setting a lower flash output using [Flash Adjust.] 
.
 
Do not put your hands over the light-emitting area of the flash or look at it from close range. 
Do not use the flash at close distances to other subjects (heat/light may damage subject).
 
Flash charging may take time if battery is low or if using flash repeatedly. When the flash is being 
charged, the flash icon flashes red, and you cannot take a picture even when you fully press the 
shutter button.
 
The flash is fixed to [   ] (Forced Flash Off) in following cases:
 •During motion picture recording
 •When the picture effect (Filter) is set
 •During panorama picture recording
 •When using the electronic shutter
 •When [HDR] is set to [ON]
 •When [Silent Mode] is set to [ON]