Panasonic DMC-LX100 사용자 설명서
250
SQW0021
Wi-Fi
Sending pictures to a PC
[Send Images Stored in the Camera]
1
Set the menu
→ [New Connection] → [Send Images Stored in the Camera] → [PC]
2
Select [Via Network] or [Direct] to connect
3
Select the PC you want to connect to
•If the PC you want to connect to is not displayed, select [Manual Input], then enter the computer
name (for Mac, enter the NetBIOS name).
4
Select the folder you want to send to
•When the connection is established, the confirmation screen for the transmission setting is
displayed. Check the setting and press [MENU/SET]. To change the send setting, press [DISP.]
button.
5
Select [Single Select] or [Multi Select]
[Single Select]
Select the picture
Press [MENU/SET]
[Multi Select]
Select the picture (repeat)
•If selected again, the setting will be canceled.
Select [OK]
•The number of pictures that can be sent by [Multi Select] is
limited.
2
3
4
5
6
1
OK
•A confirmation screen is displayed. If you select [Yes], the operation is executed.
•To change the send setting, press [DISP.] button.
•To close the connection, select [Exit].
●
Folders sorted by the sent date are created in the specified folder, and pictures are saved in those
folders.
●
If the screen for a user account and password entry appears, enter the one you set on your PC.
●
If the computer name (for Mac, the NetBIOS name) contains spaces, etc., the name may not be
properly recognized. If you cannot connect, we recommend changing the computer name (for
Mac, the NetBIOS name) to a combination of 15 or less alphanumeric characters only.