Panasonic DMC-LX100 사용자 설명서

다운로드
페이지 332
315
SQW0021
Others
Q&A  Troubleshooting
 
Flash
Unable to perform [Flash].
 •Flash (supplied/optional) is not attached properly.
→  Properly attach a flash (supplied/optional) to the camera. 
 •For details about flash settings, refer to 
.
No flash emitted.
The flash becomes unavailable in the following cases.
 •When the picture effect (Filter) is set
 •When camera is set to use [Auto Bracket], White Balance Bracket, or [Aspect Bracket]
 •When using [Burst]
 •During panorama picture recording
 •When [HDR] is set to [ON]
 •When the electronic shutter is used 
→  Set [Shutter Type] to [AUTO] or [MSHTR].
 •When [Silent Mode] is set to [ON] 
→  Set [Silent Mode] to [OFF].
The flash fires twice.
 •The flash (supplied) fires twice. (Except when [Firing Mode] of [Flash] is set to [MANUAL]) When 
red-eye reduction 
 is set, the firing interval will be longer. Make sure that the subject does 
not move until the second firing is completed.