Sony DCR-PC7 매뉴얼

DCR-PC7.3-858-174-22 (E,S)

• The cassette was ejected after you recorded on it.

m

The End Search function will not activate until you
make a new recording after reinserting the cassette.

• The POWER switch is set to CAMERA or OFF.

m

Set it to VTR. (p. 21)

• The tape has run out.

m

Rewind the tape or use a new one. (p. 21)

• The volume is turned to the minimum.

m

Open the LCD panel and press VOLUME +. (p. 21)

• S SHOT is set to OFF in the menu system.

m

Set it to ON. (p. 38)

• The POWER switch is set to PHOTO.

m

Set it to CAMERA.

• The START/STOP MODE switch is set to 5SEC or 

.

m

Set it to  . (p. 18)

• Focus is set to the manual mode.

m

Set it to autofocus. (p. 43)

• Shooting conditions are not suitable for autofocus.

m

Set focus to manual mode to focus manually. (p. 43)

• The START/STOP MODE switch is set to 5SEC or 

.

m

Set it to  . (p. 18)

• The viewfinder lens is not adjusted.

m

Adjust the viewfinder lens. (p. 13)

• The contrast between the subject and background is too

high.  The camcorder is not malfunctioning.
m

Change locations.

• The video heads may be dirty.

m

Clean the heads using the Sony DVM12CL (not
supplied) cleaning cassette. (p. 67)

• The video heads may be dirty.

m

Clean the heads using the Sony DVM12CL (not
supplied) cleaning cassette. (p. 67)

• LCD BRIGHT is not adjuted properly.

m

Press + or – to obtain the brightness you want. (p. 16)

• The camcorder is not malfunctioning.

• The LCD panel is open.

m

 Close the LCD panel.

• Incorporated fluorescent tube is worn out.

m

Please contact your nearest Sony dealer.

The End Search function does not
activate.

The tape does not move when a tape
transport button is pressed.

No sound or only a low sound is heard
when playing back a tape.

The SteadyShot function does not activate.

Recording stops at once.

Recording stops in a few seconds.

The autofocus function does not activate.

The fader function does not work.

The image on the viewfinder screen is not
clear.

A vertical band appears when a subject
such as lights or a candle flame is shot
against a dark background.

The picture is “noisy" or does not appear.

v

 indicator flashes on the LCD screen or

in the viewfinder.

The picture is too bright or too dark.

A vertical band appears when shooting a
very bright subject.

The picture does not appear in the
viewfinder.

The picture does not appear on the LCD
screen or in the viewfinder.