Sony HDR-AX2000E 사용자 설명서

The buttons on the touch panel may not 
work correctly. If this happens, follow the 
procedure below. It is recommended that 
you connect your camcorder to the wall 
outlet (wall socket) using the supplied AC 
Adaptor during the operation.

1

Turn on the camcorder.

2

Press the MENU button 

t select 

(OTHERS) 

t [CALIBRATION] 

with the SEL/PUSH EXEC dial.

3

Touch “

×” displayed on the screen with 

the corner of memory card or the like 3 
times.

• If you did not press the right spot, try the 

calibration again.

• Touch [CANCEL] to cancel calibration.

b

• Do not use a sharp-pointed object for 

calibration. Doing so may damage the LCD 
screen.

• If the casing is soiled, clean the camcorder body 

with a soft cloth lightly moistened with water, 
and then wipe the casing with a dry soft cloth.

• Avoid the following to avoid damage to the 

finish.
– Using chemicals such as thinner, benzine, 

alcohol, chemical cloths, repellent, insecticide 
and sunscreen.

– Handling with above substances on your 

hands.

– Leaving the casing in contact with rubber or 

vinyl objects for a long period of time.

• Wipe the surface of the lens clean with a soft 

cloth in the following instances:
– When there are fingerprints on the lens 

surface.

– In hot or humid locations
– When the lens is exposed to salty air such as 

at the seaside.

• Store in a well-ventilated location subject to 

little dirt or dust.

• To prevent mold, periodically clean the lens as 

described above.

Your camcorder has a pre-installed 
rechargeable battery to retain the date, time, 
and other settings even when the POWER 
switch is set to OFF. The pre-installed 
rechargeable battery is always charged 
while your camcorder is connected to the 
wall outlet (wall socket) via the AC 
Adaptor or while the battery pack is 
attached. The rechargeable battery will be 
fully discharged in about 3 months if you 
do not use your camcorder at all without the 
AC Adaptor connected or the battery pack 
attached. Use your camcorder after 
charging the pre-installed rechargeable 
battery.
However, even if the pre-installed 
rechargeable battery is not charged, the 
camcorder operation will not be affected as 
long as you are not recording the date.

x

Connect your camcorder to a wall outlet 
(wall socket) using the supplied AC 
Adaptor, and leave it with the POWER 
switch set to OFF for more than 24 hours.

,