Sony DCR-HC26E 사용자 설명서
25
E:\SONY\2659812111\01GB03BAS_E.fm
DCR-HC23E/HC24E/HC26E/HC35E
2-659-812-11(1)
Re
co
rdi
ng/
Pl
co
rdi
ng/
Pl
a
yb
a
ck
To fix the exposure for the selected
subject (Flexible spot meter)...... qa
subject (Flexible spot meter)...... qa
See [SPOT METER] on page 38.
To record in mirror mode .......... qd
Open the LCD panel qd 90 degrees to the
camcorder (1), then rotate it 180 degrees
to the lens side (2).
camcorder (1), then rotate it 180 degrees
to the lens side (2).
• A mirror-image of the subject appears on the
LCD screen, but the picture will be normal
when recorded.
when recorded.
To use a tripod....................... qf
Attach the tripod (optional: the length of the
screw must be less than 5.5 mm (7/32 in.))
to the tripod receptacle qf using a tripod
screw.
screw must be less than 5.5 mm (7/32 in.))
to the tripod receptacle qf using a tripod
screw.
To use a Shoulder Belt ............. 6
Attach the Shoulder Belt (optional) to its
designated hook 6.
designated hook 6.
To play back the images with added
special effects (Picture effect) .... qa
special effects (Picture effect) .... qa
See [P EFFECT] on page 44.
To check the remaining battery
(Battery Info) ......................... 8
(Battery Info) ......................... 8
Set the POWER switch to OFF(CHG), then
press DISP/BATT INFO 8. The battery
information appears for about 7 seconds.
You can view the battery information for up
to 20 seconds by pressing DISP/BATT
INFO again while the battery information is
displayed.
press DISP/BATT INFO 8. The battery
information appears for about 7 seconds.
You can view the battery information for up
to 20 seconds by pressing DISP/BATT
INFO again while the battery information is
displayed.
To turn off the operation confirmation
beep (BEEP) .......................... qa
beep (BEEP) .......................... qa
See [BEEP] on page 50.
To initialize the settings
(RESET)................................ 9
(RESET)................................ 9
Press RESET 9 to initialize all the
settings, including the setting of the date
and time.
settings, including the setting of the date
and time.
Other part names and functions
D Remote sensor (DCR-HC24E/HC35E)
E Internal stereo microphone
J Speaker
J Speaker
Playback sound comes out from the
speaker.
speaker.
• For how to adjust the volume, see page 23.
Playback
2
1
Recording/playback
BATTERY INFO
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
LCD SCREEN
VIEWFINDER
VIEWFINDER
:
:
:
86
99
99
min
min
min
0%
50%
100%
Remaining battery (approx.)
Recording capacity (approx.)