Sony Digital Video Camera Recorder 사용자 설명서
Other functions
Oth
e
e
r fu
n
n
cti
o
n
s
35
Camera Operations Guide supplied with
your camcorder.
your camcorder.
3
Insert a recorded cassette into your
camcorder.
camcorder.
4
Connect your camcorder to a
computer via an i.LINK cable
(optional).
computer via an i.LINK cable
(optional).
b
Note
• When you connect your camcorder to a
computer, make sure you insert the connector in
the correct direction. If you insert the connector
forcibly, it may be damaged, and causes a
malfunction of your camcorder.
the correct direction. If you insert the connector
forcibly, it may be damaged, and causes a
malfunction of your camcorder.
5
Touch [P-MENU], [MENU] and
[
[
(EDIT/PLAY)], then touch to
select [BURN DVD].
“Click to DVD” starts up and the on-screen
instructions appear on your computer.
For details, refer to the separate Camera
Operations Guide supplied with your
camcorder.
instructions appear on your computer.
For details, refer to the separate Camera
Operations Guide supplied with your
camcorder.
6
Place a writable DVD in the disc drive
of the computer.
of the computer.
7
Touch [EXEC] on the LCD screen of
your camcorder.
your camcorder.
The status of the operation on your
computer is displayed on the LCD screen of
your camcorder.
CAPTURING: The picture recorded on
the tape is being copied to the computer.
CONVERTING: The picture is being
converted to the digital format.
computer is displayed on the LCD screen of
your camcorder.
CAPTURING: The picture recorded on
the tape is being copied to the computer.
CONVERTING: The picture is being
converted to the digital format.
WRITING: The picture is being written
onto the DVD.
onto the DVD.
z
Tip
• If you use a DVD-RW/+RW which has other
data stored on it, the message [This is a
recorded disc. Delete and overwrite?] appears
on the LCD screen of your camcorder. When
you touch [EXEC], the existing data is erased
and new data will be written.
recorded disc. Delete and overwrite?] appears
on the LCD screen of your camcorder. When
you touch [EXEC], the existing data is erased
and new data will be written.
8
Touch [NO] after creating a DVD.
The disc tray comes out automatically.
To create another DVD with the same
content, touch [YES]. The disc tray comes
out and place a new writable DVD in the
disc drive.
content, touch [YES]. The disc tray comes
out and place a new writable DVD in the
disc drive.
To cancel the operation
On your camcorder, touch [CANCEL] after step
5, or select [CANCEL], then touch [YES] in
step 7.
Note that you cannot cancel the operation after
[Finalizing DVD] is displayed on the LCD
screen.
5, or select [CANCEL], then touch [YES] in
step 7.
Note that you cannot cancel the operation after
[Finalizing DVD] is displayed on the LCD
screen.
b
Notes
• Do not disconnect the i.LINK cable or set the
POWER switch to another mode on your camcorder
until the picture is completely copied to the
computer.
until the picture is completely copied to the
computer.
• The DVD will be created even if you disconnect the
i.LINK cable (optional) or turn off the power of your
camcorder while [WRITING] or [CONVERTING]
is displayed.
camcorder while [WRITING] or [CONVERTING]
is displayed.
• When any of the following occurs, copying of the
picture is canceled. A DVD containing the data up to
the point the operation was canceled will be created.
Refer to the help files of “Click to DVD Automatic
Mode” for details.
– When there is a blank portion of 10 seconds or
the point the operation was canceled will be created.
Refer to the help files of “Click to DVD Automatic
Mode” for details.
– When there is a blank portion of 10 seconds or
longer on the tape.
0:00:00:00
CREATE DVD?
BURN DVD
START
EXEC
CANCEL
0:00:00:00
Create another
copy?
Disctray opens.
BURN DVD
COMPLETED
YES
NO
,
continued