Samsung HMX-U100UN 사용자 설명서

21.  LIGHTNING:  

For added protection of this CAMCORDER during a 

lightning storm or when it is left unattended and unused 

for long periods of time, unplug it from the wall outlet 

and disconnect the antenna or cable system. This will 

prevent damage to the CAMCORDER due to lightning 

and powerline surges.

22.  POWER LINES:  

An outside antenna system should not be located in the 

vicinity of overhead power lines or other electric light 

or power circuits where it can fall into such power lines 

or circuits. When installing an outside antenna system, 

extreme care should be taken to keep from touching 

such power lines or circuits as contact with them might 

be fatal.

23.  OVERLOADING:  

Do not overload wall outlets and extension cords as this 

can result in a risk of fire or electric shock.

24.  OBJECTS AND LIQUIDS:  

Never push objects of any kind into this CAMCORDER 

through openings as they may touch dangerous voltage 

points or short out a part that could result in a fire or 

electric shock. Never spill liquids of any kind onto the 

CAMCORDER. Should spillage occur, unplug unit and 

have it checked by a technician before use.

25.  SERVICING:  

Do not attempt to service this CAMCORDER yourself. 

Opening or removing covers may expose you to 

dangerous voltage or other hazards. Refer all servicing 

to qualified service personnel.

26.  DAMAGE REQUIRING SERVICE:  

Unplug this CAMCORDER from the wall outlet and 

refer servicing to qualified service personnel under the 

following conditions:

a.  When the power-supply cord or plug is damaged.

b.  If any liquid has been spilled onto, or objects have 

fallen into the CAMCORDER.

c.  If the CAMCORDER has been exposed to rain or 

water.

d.  If the CAMCORDER does not operate normally 

by following the operating instructions, adjust only 

those controls that are covered by the operating 

instructions. Improper adjustment of other controls 

may result in damage and will often require 

extensive work by a qualified technician to restore 

the CAMCORDER to its normal operation.

e.  If the CAMCORDER has been dropped or the 

cabinet has been damaged.

f.  When the CAMCORDER exhibits a distinct change 

in performance, this indicates a need for service.

27.  REPLACEMENT PARTS:  

When replacement parts are required, be sure the 

service technician has used replacement parts specified 

by the manufacturer and has the same characteristics 

as the original part. Unauthorized substitutions may 

result in fire, electric shock or other hazards.

28.  SAFETY CHECK:  

Upon completion of any service or repairs to this 

CAMCORDER, ask the service technician to perform 

safety checks to determine that the CAMCORDER is in 

safe operating order.

29.  To prevent damage which may result in fire or shock 

hazard, do not expose this appliance to rain or moisture.

30.  If this power supply is used at 240V ac, a suitable plug 

adaptor should be used.

English