Hasselblad 3034216 사용자 설명서

As with all digital products, it is essential that you maintain a constant check on battery condition
and preferably have a fully-charged reserve battery with you at all times when not tethered to a
computer.



CAUTION

If you remove the digital back, be very careful not to touch or scratch the CCD/ﬁlter
surface while it is exposed.

Always attach the protective cover for transportation or storage.

Powering the digital back

The CFV requires power either from the battery (7.2V Sony InfoLithium L type − NP-F550

for example) or from a computer via a FireWire cable.

To attach a battery:
1. Firstly, ensure the battery is fully charged (see user appropriate manual for battery

and charger).

2. Position the battery as in the illustration.
3. Press the battery towards the camera. This automatically depresses the battery

retaining catch.

4. Slide the battery into the ﬁnal position ensuring the contact prongs on the camera

are inserted into the battery. The battery retaining catch will now return to the safe-
ty position

To remove a battery:
1. Depress the battery retaining catch and slide the battery over it. It can then be freely

removed.

FireWire connection:
1. Simply connect the FireWire cable between the FireWire connector on the digital

back and the USB port on the computer.

ON / OFF button

With a fully charged battery ﬁtted or when tethered to a computer, press the ON/OFF

(

) button to activate the digital back. An audible signal will be heard and a Hasselblad

logo splash screen will appear on the OLED. The back will enter standby mode after the

preset time to save the battery. Press the ON/OFF button again to turn the digital back

oﬀ. An audible signal will be heard again to conﬁrm this.



