Hitachi DZ-HS500SW 사용자 설명서
English
30
Turning DVD Video Camera/Recorder On and
Off
Off
While holding down the grey button at the right
of power switch, set the switch according to
each recording function:
of power switch, set the switch according to
each recording function:
P
Note
:
• Once you turn the DVD video camera/recorder on to
let it recognise the disc, you can immediately record
or play back by turning the DVD video camera/
recorder on again. However, if a long time has
elapsed after the disc was inserted, it will take some
time for the DVD video camera/recorder to start
because it must recognise the disc again (see
“Troubleshooting” on page 145).
or play back by turning the DVD video camera/
recorder on again. However, if a long time has
elapsed after the disc was inserted, it will take some
time for the DVD video camera/recorder to start
because it must recognise the disc again (see
“Troubleshooting” on page 145).
• It will take some time for the DVD video camera/
recorder to display the Disc Navigation screen after
power is turned on.
power is turned on.
• When the DVD video camera/recorder is turned on,
the self-diagnosis function will work and a message
may appear. In this case, refer to “Trouble Messages”
on page 138 and take corrective action.
may appear. In this case, refer to “Trouble Messages”
on page 138 and take corrective action.
• When turning the DVD video camera/recorder off or
changing over the power switch between “HDD” and
“DVD”, you will not need to hold down the grey button:
Simply move the power switch.
“DVD”, you will not need to hold down the grey button:
Simply move the power switch.
Set to “OFF”:
The DVD video camera/
recorder will turn off
recorder will turn off
Set to “SD”:
To record photos on an SD
memory card and play
them back
memory card and play
them back
Set to “HDD”:
To record or dub movie on
HDD and play it back
HDD and play it back
Set to “DVD”:
To record movie on DVD-
RAM/DVD-RW/DVD-R/
+RW and play it back
RAM/DVD-RW/DVD-R/
+RW and play it back
Power switch