Hitachi DZMV550A 사용자 설명서
English
163
No DVD Video Camera/Recorder Operation -
Check the Following:
Check the Following:
Check 1
No movie can be recorded
Movie can be recorded only on DVD-RAM or DVD-R
disc.
Check the following:
disc.
Check the following:
•
Is DVD-RAM or DVD-R disc inserted?
•
Is power switch set to “
O
VIDEO”?
•
Is the DVD-RAM disc in DVD video camera/
recorder write-protected? Release the write-
protect.
recorder write-protected? Release the write-
protect.
•
Does disc have remaining recording space?
If movie still cannot be recorded after the above
check is clear, the disc may be damaged: Use
another disc.
check is clear, the disc may be damaged: Use
another disc.
Check 2
No still can be recorded
Still can be recorded only on DVD-RAM disc, SD
memory card or MultiMediaCard.
Check the following:
memory card or MultiMediaCard.
Check the following:
•
Is DVD-RAM disc, SD memory card or
MultiMediaCard inserted?
MultiMediaCard inserted?
•
Is power switch set to match the recording
medium?
medium?
−
When using DVD-RAM disc:
Set to “
Set to “
N
PHOTO”.
If the LOCK switch on this DVD video camera/
recorder is set to
recorder is set to
(to left), set it to
(to right).
If the LOCK switch is set to
(to left), switching
to “
N
PHOTO” is not possible.
−
When using SD memory or MultiMediaCard:
Set to “
Set to “
P
PHOTO”.
•
Is loaded DVD-RAM disc write-protected?
•
When using SD memory card: Is the erase
prevention switch locked? (P.28)
prevention switch locked? (P.28)
•
Does disc or card have remaining recording
space?
space?
If still cannot be recorded after the above check is
clear, the disc or card may be damaged: Use another
disc or card.
clear, the disc or card may be damaged: Use another
disc or card.
Check 3
Skip or search playback does
not work well
not work well
If the temperature inside the DVD video camera/
recorder is high, normal operation may not be
possible. Turn the DVD video camera/recorder off,
wait for a few moments, and then turn it on again for
operation.
recorder is high, normal operation may not be
possible. Turn the DVD video camera/recorder off,
wait for a few moments, and then turn it on again for
operation.
Check 4
• No operation can be
performed because the
ACCESS/PC or CARD
ACCESS indicator on this
DVD video camera/recorder
remains lit or blinking.
ACCESS/PC or CARD
ACCESS indicator on this
DVD video camera/recorder
remains lit or blinking.
• After disc or card is inserted, it
takes some time until
recording is possible.
recording is possible.
In the following cases, it will take more time than
usual until operation is possible:
usual until operation is possible:
•
When disc or card is removed and then reinserted
•
When date changes (e.g., during the first recording
of the day)
of the day)
•
When the temperature is greatly different from the
status of previous recording
status of previous recording
•
When disc with scratches, dirt or fingerprints is
inserted
inserted
•
When disc is subject to severe vibrations
•
When the battery or DC power cord was
disconnected instead of following the correct
procedure using power switch to turn the DVD
video camera/recorder off
disconnected instead of following the correct
procedure using power switch to turn the DVD
video camera/recorder off