Hitachi DZ-GX3100A 사용자 설명서
English
33
1<>2/3
Setting Date and Time
Set the current date and time so that the date and time you make a recording can be recorded
correctly.
The following procedure can also be used to correct the date and time you have already set.
correctly.
The following procedure can also be used to correct the date and time you have already set.
1
Press the MENU button, use the f/e/
d/c buttons to choose “Date Setup” and
then “Date Set”.
d/c buttons to choose “Date Setup” and
then “Date Set”.
2
Press the c button.
The figure for the
month will be selected.
[The digit that is
highlighted first depends on the date display
format (set up in Date Mode): The digit on the
left end of the date display will be first
highlighted.]
month will be selected.
[The digit that is
highlighted first depends on the date display
format (set up in Date Mode): The digit on the
left end of the date display will be first
highlighted.]
Note
:
After setting the figure for the month, press the
c
button to select the digit to be set. If you press the
A
button after selecting the figure for the month,
the screen for verifying the set date will appear
instead of screen for setting day, year or time.
instead of screen for setting day, year or time.
3
Press the d or c
button to select the digit
you want to set in
sequence.
button to select the digit
you want to set in
sequence.
Press the f or e button to select the
number for current date/time, and then
repeat step 3 to set the current date and time.
number for current date/time, and then
repeat step 3 to set the current date and time.
Note
:
To stop date/time setting midway, press the
C
button.
4
After setting the current
date and time, press the
A button.
date and time, press the
A button.
The screen for verifying
the set date will appear.
the set date will appear.
5
If the displayed date and time are correct,
press the d button to choose “YES”, and
then press the A button.
press the d button to choose “YES”, and
then press the A button.
The date and time will be set, and the DVD
video camera/recorder will enter the
recording pause status.
Choosing “NO” will restore the menu screen.
video camera/recorder will enter the
recording pause status.
Choosing “NO” will restore the menu screen.
CHANGING DISPLAY FORMAT OF DATE AND TIME
You can select one of three date display formats: month/day/year, day/month/year or year/
month/day. Choose “Date Mode” on the “Date Setup” menu screen in procedure 1, and then set to
the desired date display mode.
month/day. Choose “Date Mode” on the “Date Setup” menu screen in procedure 1, and then set to
the desired date display mode.
Note
:
This DVD video camera/recorder incorporates a rechargeable battery to store the date and time in memory. If this
built-in battery is exhausted, the date and time will be reset. To prevent this, connect the AC adapter/charger to DVD
video camera/recorder every 6 months, and leave them for at least 24 hours with the DVD video camera/recorder
turned off: The built-in battery will be charged.
built-in battery is exhausted, the date and time will be reset. To prevent this, connect the AC adapter/charger to DVD
video camera/recorder every 6 months, and leave them for at least 24 hours with the DVD video camera/recorder
turned off: The built-in battery will be charged.
Use
f
/
e
/
d
/
c
buttons
to select, and then press
A
to
designate.
Da t e Mode
ENTER
RETURN
Da t e Se t
1
/ 1 / 2 0 0 6
1 2 : 0 0AM
Da t e Se t u p
8 : 00AM
Da t e Mode
ENTER
RETURN
Da t e Se t
9 /
3 0
/ 2 0 0 6
Da t e Se t u p
ENTER
9 / 3 0 / 2 0 0 6 8 : 0 0 AM
Da t e s e t u p?
Da t e s e t u p?
YES
NO
Da t e Se t