Fujifilm 16113421 사용자 설명서

For best results, move the camera in a small circle at 
a steady speed, keeping the camera horizontal and 
being careful only to pan in the direction shown by 
the guides.  If the desired results are not achieved, try 
panning at a different speed.

In this mode, the camera sets exposure 
automatically.  If desired, you can choose 
different combinations of shutter speed 
and aperture that will produce the same 
exposure (program shift).

3 Caution
If the subject is outside the metering range of the cam-
era, the shutter speed and aperture displays will show 
“---”.  Press the shutter button halfway to measure ex-
posure again.

Rotate the command dial to choose the desired com-
bination of shutter speed and aperture.  The default 
values can be restored by raising the flash, rotating 
the mode dial to another setting, turning the cam-
era off, or selecting playback mode.  The flash must 
be off for Program shift to be available.  Furthermore, 
an option other than AUTO  must  be  selected  for 
U DYNAMIC RANGE and N ISO.