Sony BDP-S480 매뉴얼

다운로드
페이지 35
28
, When you connect the player to a TV 
through an AV amplifier (receiver), 
– if the AV amplifier (receiver) is not 
compatible with the [Control for HDMI] 
function, you may be unable to control 
the TV from the player.
– if you change the HDMI connection, 
disconnect and reconnect the AC power 
cord, or a power failure occurs, try the 
following: 
1
Switch the input selector of 
the AV amplifier (receiver) so that the 
picture from the player appears on the 
TV screen. 
2
Set [Control for HDMI] to 
[Off], then set [Control for HDMI] to 
[On] (page 24). Refer to the instruction 
manual supplied with the AV amplifier 
(receiver).
The System Power-Off function does not 
work (BRAVIA Sync).
, Check that [Control for HDMI] and 
[HDMI: Linked to TV-off] are set to [On] 
(page 24).
Playback does not start from the 
beginning of content.
, Press OPTIONS, and select [Play from 
beginning].
Playback does not start from the resume 
point where you last stopped playing.
, The resume point may be cleared from 
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
The disc tray does not open and 
“LOCKED” or “TLK ON” appears on the 
front panel display.
, When “LOCKED” appears, the player is 
locked. To cancel the Child Lock, hold 
down N on the player until “UNLOCK” 
appears on the front panel display (page 7).
, When “TLK ON” appears, contact your 
Sony dealer or local authorized Sony 
service facility.
The disc tray does not open and you 
cannot remove the disc even after you 
press 
Z.
, Try the following: 
1
Turn the player off, 
and disconnect the AC power cord. 
2
Reconnect the AC power cord while 
pressing down Z on the player. 
3
Keep 
pressing down Z on the player until the tray 
opens. 
4
Remove the disc. 
5
When 
“OPEN” appears on the front panel display, 
hold down [/1 on the player for more than 
10 seconds until the player turns off.
“Exxxx” or “FAN ERR” appears on the 
front panel display.
, When “Exxxx” appears, contact your 
nearest Sony dealer or local authorized 
Sony service facility and give the error 
code.
, When “FAN ERR” appears, try the 
following: 1Check that the ventilation 
holes on the rear of the player are not 
blocked. 2Place the player in a location 
with adequate ventilation to prevent heat 
build-up in the player.
The player does not respond to any button.
, Moisture has condensed inside the player 
, Hold down [/1 on the player for more than 
10 seconds until the indicators on the front 
panel display turn off. 
If the player still does not respond to any 
button, disconnect then reconnect the AC 
power cord.
Others