Panasonic DMP-BD85EGK 사용자 설명서
8
VQT2H76
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you temporarily
disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder. Due
to copy guard protection the picture may not be displayed
properly.
properly.
≥ Refer to page 34, about recommended settings for each
piece of connected equipment.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft) or less.
Recommended part number:
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters (16.4 ft) or less.
Recommended part number:
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
Highest Quality
(VIDEO)
(VIDEO)
Standard Quality
(VIDEO)
(VIDEO)
∫ Via an HDMI AV OUT terminal
∫ Via a COMPONENT VIDEO
OUT terminal
∫ Via a VIDEO OUT terminal
≥ The HDMI connection supports
VIERA Link “HDAVI Control” (> 22)
when used with a compatible
Panasonic TV.
when used with a compatible
Panasonic TV.
≥ Set “HDMI Video Mode” and “HDMI
Audio Output” to “On” (> 28).
≥ Connect terminals of the same color.
≥ Set “Component Video Resolution” to
≥ Set “Component Video Resolution” to
“480p”, “720p” or “1080i” (> 28).
≥ Set “HDMI Video Mode” to “Off”
(> 28).
≥ Connect terminals of the same color.
HDMI IN
HDMI cable
COMPONENT
VIDEO IN
AUDIO IN
R L
Component
Video cable
Video cable
Audio/Video
cable
(included)
cable
(included)
AUDIO IN
R L VIDEO IN
Audio/Video
cable (included)
cable (included)
VQT2H76~Body_eng.fm 8 ページ ２００９年１２月１１日 金曜日 午前１０時３１分