Panasonic DMP-BDT330 사용자 설명서

VQT4V26

≥ Refer to the operating instructions of the hub or router.
≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates 

settings relating to the connection and security of wireless 
LAN devices. To see whether your wireless router supports 
WPS, check the wireless router operating instructions.

≥ You can perform this setup anytime by selecting “Easy 

Network Setting” in the Setup menu. (

> 32)

≥ You can redo these settings individually using “Network 

Settings”. (

> 32)

≥ Do not use this unit to connect to any wireless network for 

which you do not have usage rights.
During automatic searches in a wireless network 
environment, wireless networks (SSID) for which you do 
not have usage rights may be displayed; however, using 
these networks may be regarded as illegal access.

≥ After performing network settings on this unit, the settings 

(encryption level, etc.) of the wireless router might change. 
When you have trouble getting online on your PC, perform 
the network settings on your PC in accordance with the 
settings of wireless router.

≥ Please be aware that connecting to a network without 

encryption may result in the content of the communication 
being illegitimately viewed by a third party, or the leaking of 
data such as personal or secret information.

* SSID:

An SSID (Service Set IDentification) is a name used by 
wireless LAN to identify a particular network. 
Transmission is possible if the SSID matches for both 
devices.

If you have more than one Panasonic player/
recorder and the remote control operates both 
products at once, you will need to change the 
remote control code to prevent this occurrence. 
(

> 34, “Remote Control Code”)

Occasionally, Panasonic may release updated 
firmware for this unit that may add or improve the 
way a feature operates. These updates are 
available free of charge.

This unit is capable of checking the firmware 
automatically when connected to the Internet via 
a broadband connection.
When a new firmware version is available, the 
following message is displayed.

To update the firmware

Press [HOME] 
> press [OK] to select “Setup”
> select “Player Settings” 
> select “System” and press [OK] 
> select “Firmware Update” and press [OK] 
> select “Update Now” and press [OK]

DO NOT DISCONNECT the unit from the AC 
power or perform any operation while the update 
takes place.
After the firmware is installed, “FIN” will be 
displayed on the unit’s display. Unit will restart 
and the following screen will be displayed.

≥ If downloading on this unit fails or this unit is not 

> 34, “Firmware Version Information”)

≥ Downloading will require several minutes. It may take 

≥ If you do not want to check for the latest firmware version, 

set “Automatic Update Check” to “Off”. (

> 34)

New firmware is available.

Please update firmware in Setup.

The firmware was updated.

Current Version

: 

x.xx

RETURN

OK

DMP-BDT330_230_VQT4V26_eng.book  16 ページ  ２０１２年１２月２７日　木曜日　午前１１時１３分