Panasonic KX-TVP200 사용자 설명서

90

Installation Manual

 Start up completed.

The Power Indicator light stops blinking when the start-up has been successful. (The 
delay varies according to the system’s condition.) 

 is displayed.

System prompt [> ] is displayed on the screen. To enter system administration, Press 
ENTER. All parameters can be set through the menu-driven programme.

When the System Administrator starts operation, the system asks for the terminal type. 
By choosing VT100 [2], all parameters can be set through the menu-driven programme. 

Please Enter the Number:= [2] 

Select [2] because Quick Setup is only available when using a personal computer that 
can emulate a VT100 terminal. 

 Go to the 

 Select [5] and Press ENTER, or Type [3] then 

QSET and Press ENTER for Quick Setup and follow the Auto Configuration Instructions. 

The required programming is complete and the VPS and KX-TD1232 should be able to 
communicate through DPT Integration.

We recommend that the KX-TD1232 system has any optional extension cards installed and 
telephones connected before starting the VPS.

When running the Quick Setup command (Section 5 CUSTOMISING THE SYSTEM) from the 
VPS, the PBX transmits the extension information automatically. This saves time when 
programming the VPS.