AT&T 200 사용자 설명서
24
M
AKING AND
R
ETURNING
C
ALLS
☞
Refer to Figure 8 on Page 23.
With the touch of a button, you can speed dial calls from your Call Log (Please refer
to page 12 to set up dialing).
to page 12 to set up dialing).
To speed dial a number from your Call Log, first make sure the unit is in the CALLS
mode -the light should be on beside CALLS (1). Use the REVIEW ▲ or REVIEW ▼
(2 or 3) to scroll through the stored numbers until you have found the one you want.
mode -the light should be on beside CALLS (1). Use the REVIEW ▲ or REVIEW ▼
(2 or 3) to scroll through the stored numbers until you have found the one you want.
Once the desired number appears on the display, press the DIAL PHONE (4) key.
After you have pressed the DIAL PHONE key and the AT&T VoiceMail Manager 200
has dialed the desired number, you must either pick up the handset of your telephone
or press the speaker button on your own speakerphone to speak to the person you
have called.
After you have pressed the DIAL PHONE key and the AT&T VoiceMail Manager 200
has dialed the desired number, you must either pick up the handset of your telephone
or press the speaker button on your own speakerphone to speak to the person you
have called.
The AT&T VoiceMail Manager 200 is not a speakerphone, so you must use your own
telephone to complete your call. The message PICK UP THE PHONE will be
displayed to remind you of this. (Note: You may use the DIAL PHONE/HANG UP (4)
key to hang up).
telephone to complete your call. The message PICK UP THE PHONE will be
displayed to remind you of this. (Note: You may use the DIAL PHONE/HANG UP (4)
key to hang up).