AT&T 200 사용자 설명서

 

 

31

 

To save desk space and facilitate ease of use, your AT&T VoiceMail Manager 200 
can be mounted on the wall.  Use the template on the following page and two (2) one-
inch-long #6 screws. 

☞ 

Select a location that is near your telephone jack and a power outlet.  We 
recommend a location that enables optimal viewing from the position you will 
most frequently be checking the display of your unit.  For example, if you will be 
reading the display while you are at your desk or using your computer, position 
the AT&T VoiceMail Manager 200 so that you can easily see it when you are 
seated. 

1.  Hold the template against the wall where you wish to mount the AT&T 

VoiceMail Manager 200, and use a pencil to mark the position of the two 
screw holes. 

2.  Start the screw holes by lightly tapping a nail into your pencil marks.  

Remove the nail and insert the screws into the holes.  Leave one-eighth of 
an inch (1/8”) clearance between the wall and the heads of the screws. 

3.  Mount the AT&T VoiceMail Manager 200 on the wall by aligning the holes in 

the base of the unit (on the bottom near the power and line jacks), with the 
screws on the wall.  Slide the unit down until it locks into place.