Hunter Fan ICC-801PL 사용자 설명서
13
Common Wire
Master Valve
Master
Valve
Wire
Power Module
CONNECTING A MASTER VALVE .........................................................................................
NOTE: Complete this section only if you have a
master valve installed. A master valve is a
normally closed valve installed at the supply point
of the main line that opens only when the auto-
matic system is activated.
master valve installed. A master valve is a
normally closed valve installed at the supply point
of the main line that opens only when the auto-
matic system is activated.
1. At the Master Valve, attach the common wire to either solenoid wire
of the valve. Attach a separate control wire to the remaining
solenoid wire.
solenoid wire.
2. Route the wires into the controller via the field wire conduit.
3. Connect either wire from Master Valve to the P/MV terminal.
Connect remaining wire to the C (Common) terminal.