Samsung VP-D23I 사용자 설명서

다운로드
페이지 106
Digital Still Camera mode
84
84
ENGLISH
DEUTSCH
Digitalkamera-Modus
Inserting and ejecting the Memory Stick 
Inserting the Memory Stick
1. Turn the Power switch to OFF.
2. Insert the Memory Stick into the CARD slot
located beneath the camcorder, in the direction
of the arrow.
Ejecting the Memory Stick
1. Turn the Power switch to OFF.
2. Push the Memory Stick, then it comes out of
the camcorder automatically.
3. Pull out the Memory Stick.
Reference
If you set the camcorder to M.PLAY mode, 
the last recorded still image appears.
-
If there are no recorded images on the Memory
Stick, NO STORED PHOTO! or NO STORED
MPEG4! and 
will display on the screen.
While recording, loading, erasing, or formatting, 
do not turn off the power or change the mode.
Please turn the power off before you insert or eject the Memory Stick.
You could lose data on the Memory Stick.
Do not allow metal substances to come in contact with the
terminals of the Card.
Do not bend the Card.
After pulling the card out from the camcorder, please keep the
Memory Stick in a soft case to prevent static shock.
The stored contents may be changed or lost as a result of misuse,
static electricity, electric noise or repair. 
Save important images separately.
Samsung is not responsible for data loss due to misuse.
If the USB cable is connected to the camcorder, the 
(S.SHOW), (FWD), (REV) 
buttons
are not available in M.PLAY mode.
Memory Stick einlegen und entnehmen
Memory Stick einlegen
1.  Schalten Sie den Camcorder aus 
(Betriebsmodus-Schalter auf OFF).
2.  Schieben Sie den Memory Stick in
Pfeilrichtung in den Kartenschacht auf der 
Unterseite des Camcorders ein.
Memory Stick entnehmen
1.  Schalten Sie den Camcorder aus 
(Betriebsmodus-Schalter auf OFF).
2. Drücken Sie auf den Memory Stick; er wird 
dann automatisch vom Camcorder ausgegeben.
3. Ziehen Sie den Memory Stick ganz heraus.
Hinweise
Wenn Sie den M.PLAY-Modus aktivieren, wird 
das zuletzt gespeicherte Bild angezeigt.
-  Wenn auf dem Memory Stick keine Bilder
gespeichert sind, wird auf dem Monitor 
NO STORED PHOTO! oder NO STORED 
MPEG4! und        angezeigt.
Wechseln Sie während Speicher-, Lade-, Lösch-
oder Formatiervorgängen nicht den Modus, und trennen Sie den
Camcorder nicht von der Stromversorgung.
Schalten Sie den Camcorder aus, bevor Sie den Memory Stick
einlegen oder entnehmen. Andernfalls sind Datenverluste nicht
auszuschließen.
Achten Sie darauf, dass die Kontakte des Memory Sticks nicht mit
Metall in Berührung kommen.
Knicken Sie den Memory Stick nicht.
Bewahren Sie den Memory Stick immer in einer Schutzhülle auf,
wenn er sich nicht im Camcorder befindet. So verhindern Sie
Schäden durch statische Aufladung.
Die gespeicherten Daten können durch unsachgemäße
Handhabung, statische Aufladung, elektrische Störungen oder bei
Reparaturarbeiten beschädigt werden oder verloren gehen.
Speichern Sie wichtige Bilder deshalb auf einem separaten
Speichermedium.
Samsung übernimmt keinerlei Haftung für eventuelle
Datenverluste infolge unsachgemäßer Handhabung.
Wenn das USB-Kabel an den Camcorder angeschlossen ist, sind
die folgenden Tasten im M.PLAY-Modus nicht verfügbar:
(S. SHOW), 
(FWD) und 
(REV).
00616F D23-UK+GER (60~106)  5/12/03 2:29 PM  Page 84