Honeywell 800-06894 사용자 설명서
– 47 –
USER FUNCTIONS
USER FUNCTIONS
USER FUNCTIONS
USER FUNCTIONS
Programming Devices
Ready To Arm
5000-100-189-V0
Name
Save
Type
Trigger Output
01
Start Zone Type
Not Used
Start System Operation
Not Used
Action
None
Stop Zone Type
Not Used
Stop System Operation
Not Used
8. Select “Action”. Dependant upon the Type
selected previously, the system scrolls between
several options:
several options:
None
Permanent
On
On for 2 sec
Pulsing
Send
Send
9. Select “Start Zone Type”. The system displays
the following options:
Not Used
Entry Exit 1
Entry Exit 2
Perimeter
Interior Follower
Day/Night
24 Hour Silent
24 Hour Audible
Use the “
S” “T” buttons to scroll to second
page of zone type options.
Silent Burglary
24 Hour Auxiliary
Interior With Delay
Fire No Verification
Carbon Monoxide
Trouble
No Response
Arm Stay
Use the “
S” “T” buttons to scroll to third page
of zone type options.
Arm Away
Disarm
Monitor Resident
Monitor
Resident Response
General Monitor
General Response
10. Select “Stop Zone Type”. The system displays
the same options as step 9.
11. Select “Start System Operation”. The system
displays the following options:
Not Used
Arm Stay
Arm Away
Disarm
Any Burglary Alarm
Any Fire Alarm
Bell Timeout
End of Exit Delay
Use the “
S” “T” buttons to scroll to second
page of zone type options.
Start of Entry Delay
Chime
Kissoff Bypass
System Low Battery
System Low Battery
Reporter Failure
Duress Alarm
12. Select “Stop System Operation”. The system
displays the same options as step 11.
Use
the
“
S” “T” buttons to scroll to second
page of options.