Guardian Technologies DFT 150/175 사용자 설명서
5.5
Define Camera Inputs
MAX=nn
Sets maximum number of cameras
(default, 8)
(default, 8)
Range is 1 to 16.
Correct settings of this ensures that any receiving station does not
spend time trying to collect invalid camera inputs.
spend time trying to collect invalid camera inputs.
COL=nn
MON=nn
Set camera to Colour
Set camera to Monochrome
(default, all cameras set to colour)
Format is COL=01, COL=05 etc.
Format is MON=06, MON=15 etc.
It is important that camera inputs are correctly defined as colour or
monochrome.
Format is MON=06, MON=15 etc.
It is important that camera inputs are correctly defined as colour or
monochrome.
CAMnn=
Set camera title nn to ...
(default, Camera 01=CAMERA 01 etc.)
(default, Camera 01=CAMERA 01 etc.)
Format is CAM01=FRONT DOOR
5.6
Auxiliary Port 3
The auxiliary port 3 on the DVST can be used for programming the DVST with a PC or
for generating printer reports. Protocol is RS232 8 characters, no parity, one stop bit,
default at 9,600 baud.
for generating printer reports. Protocol is RS232 8 characters, no parity, one stop bit,
default at 9,600 baud.
AUX=
Set AUX port usage:
TERM, PRINT, MCI, DTMF, ENG, NULL
(default, ENG)
TERM is for terminal operation, control by PC.
PRINT operates as a printer connection.
MCI is for machine control interface.
DTMF is used to echo telemetry codes at the port.
ENG is used to display debug.
NULL turns the port off.
PRINT operates as a printer connection.
MCI is for machine control interface.
DTMF is used to echo telemetry codes at the port.
ENG is used to display debug.
NULL turns the port off.
Note:
Altering this command from a PC is valid, but after changing the setting the PC it will no
longer communicate with the DVST. The reason is that the port has now been assigned
a different task. .
longer communicate with the DVST. The reason is that the port has now been assigned
a different task. .
Dedicated Micros Ltd
Page 11
DVST Installation Guide
Setup