GE 4 Series 사용자 설명서

다운로드
페이지 72
Concord  4 Series Security Systems
13
Even though reaching the time-out stops the sirens, the alarm will still be in progress until the 
system is manually disarmed.
Access Codes
The system requires a valid access code before it will process most commands.
There is one System Master code which serves as the primary User Programming code for your 
system. Only a very limited number of users will need to know this code.
Concord 4 systems have six Partition Master codes (one for each partition) which allow access 
to system operations in their respective partitions. Concord Express V4 systems are single parti-
tion systems with no partition master codes.
Note  
Partitions are individual security systems within the same control panel. Partitioned systems are typi-
cally used for large buildings with several entry/exit points and different access/operating hours. They 
also work well for small strip malls, duplexes, and quad-homes where one control panel can provide 
individual security for six different tenants.
Concord 4 systems have 230 Regular User codes (000-229), while Concord Express V4 systems 
have 16 Regular User codes (00-15). These codes act like keys to arm and disarm the system. If 
necessary, they can be assigned to neighbors, baby-sitters, or repair persons for temporary use. 
Regular user codes can be changed in User Programming and are easily deleted from the system 
when no longer necessary.
Programming Access Codes
The code you use to enter User Programming determines which features such as codes and code 
attributes you’ll be able to change.
A user code can be given certain attributes that limit what the user can do within the system. 
Attributes may be changed by you, or by a dealer over the phone using downloading software.
The User Sheets in Appendix A provide a location for you to record the actual user codes and the 
attributes of each. If you need assistance in changing any code attributes contact your dealer.
Access Code Integrity
To preserve the integrity of your system, keep access codes confidential and delete extra codes as 
soon as they are no longer needed.
Avoid using obvious code patterns such as 
1234,
 
1111
2222
, etc.
System Master Code Privileges
Using the System Master code to enter User Programming lets you:
• Change the System Master code.
• Change or delete the Partition Master code in the current partition.
• Change or delete Regular User codes in the current partition.
The default System Master code is 
1234
. It is important that you change this default and record 
the new code on the User Sheets in Appendix A.
Partition Master Code Privileges
Using the Partition Master code to enter User Programming lets you:
• Change the Partition Master code in the current partition.
• Change or delete Regular User codes in the current partition.
There are no default Partition Master codes. Record all codes on the User Sheets in Appendix A.
Regular User Code Privileges
You cannot enter User Programming with a Regular User code.
The Touchpad Tamper Feature
The installer can program your system to activate a Police alarm in the case of possible touchpad 
tampering.