GE 4 Series 사용자 설명서
Concord 4 Series Security Systems
56
3. Press
B
until the touchpad displays the type of code you wish to change (Regular User codes,
Partition Master Codes, or System Master code), then press
#
. For example, if you want to
change a Regular User code, press
#
when the touchpad displays “REGULAR USER
CODES” or “REG CODES.”
4. Press
B
until the touchpad displays the user code you wish to change, then press
#
. For exam-
ple, if you want to change Regular User code 2, press
#
when the touchpad displays “USER
02” or “REG CODE 02.”
5. Enter the new code and press
#
.
6. Press
B
. “DIRECT BYPASSING” or “BYPASS” appears:
Press
1
+
#
to turn the option off for this user code.
Press
2
+
#
to turn the option on for this user code.
7. Press
B
. “REMOTE ACCESS” or “REMOTE” appears:
Press
1
+
#
to turn the option off for this user code.
Press
2
+
#
to turn the option on for this user code.
8. Press
B
. “SYSTEM TESTS” or “TESTS” appears:
Press
1
+
#
to turn the option off for this user code.
Press
2
+
#
to turn the option on for this user code.
9. Press
B
. “LATCHKEY REPORT” or “LATCH” appears:
Press
1
+
#
to turn the option off for this user code.
Press
2
+
#
to turn the option on for this user code.
Note
Step 10 can only be per-
formed on Concord 4 sys-
tems using the System
Master Code.
10. Press
B
. “PARTITION ASSIGN” or “P” appears:
Enter the desired partition numbers (1-6) for this user code.
11. Press
*
+
B
to move to the next user code, or
*
+
00
+
#
to exit the programming menus.
Note
The system will not accept
the same code for two differ-
ent users.
To erase a user code:
1. Enter the programming menus by pressing
9
+ System or Partition Master
CODE
.
2. Press
B
until the touchpad displays “USER CODES,” then press
#
.
3. The touchpad displays “REGULAR USER CODES” or “REG CODES.” Press
#
. (You can-
not delete the System Master code.)
4. Press
B
until the touchpad displays the user code you wish to erase, then press
#
. For exam-
ple, if you want to change User code 4, press
#
when the touchpad displays “USER 04” or
“REG CODE 04.”
5. Enter the System or Partition Master code you used in Step 1 and press
#
. The deleted code
appears as “USER 04 ****” or “RG 01 ––––,” for example.
6. Press
*
+
B
to move to the next user code, or
*
+
00
+
#
to exit the programming menus.
To change or delete the Partition Master Code:
1. Enter the programming menus by pressing
9
+ System or Partition Master
CODE
.
2. Press
B
until the touchpad displays “USER CODES,” then press
#
.
3. The touchpad displays “REGULAR USER CODES” or “REG CODES.” Press
B
until the
display reads “PARTITION MASTER CODE” or “PTN MASTER,” then press
#
.
4. Enter the System Master Code to delete the existing Partition Master Code
OR enter a new 4 digit Partition Master Code to replace the existing code, then press
#
.
5. Press
*
+
00
+
#
to exit the programming menus.
To change the System Master Code:
1. Enter the programming menus by pressing
9
+ System Master
CODE
.
2. Press
B
until the touchpad displays “USER CODES,” then press
#
.