Lorex Technology LH130 사용자 설명서
114
Appendix E: Replacing the Hard Drive
5
Gently remove the hard drive from the housing.
Replacing the Hard Drive
To replace the hard drive:
1
Place the new drive in the housing. Note that the hard drive must be installed upside down on
the 4/8-channel models only.
the 4/8-channel models only.
2
Reconnect the power and data cables. Each cable can only be connected one way.
3
Replace the cover, tucking the lip of the cover at the front panel.
4
Replace the screws on the side and rear panels of the cover.
Formatting the Hard Drive
If you replace the pre-installed hard drive, it
must
be formatted in order to function
properly with the system.
To format the hard disk:
1
Right-click to open the Menu Bar and click the Main Menu button (
).
2
Click Device.
3
Click the checkbox under Select to choose the drive you wish to reformat.
4
Click Format HDD.
5
When the warning window appears, click OK. Wait for the system to format the hard drive.
NOTE: You will notice that the size of the HDD and the free space are not the same. The system
uses a portion of the disk space for the operating system and initialization. This is
common in all security DVRs as well as computer hard drives.
common in all security DVRs as well as computer hard drives.
ATTENTION
: Formatting the HDD erases
all data
on the hard disk.
This step cannot be undone.
Select checkbox