Lorex Technology LH130 사용자 설명서

35

Using the Main Menu

restarts. The DVR will restart with the 
default resolution of 1024 x 768.

When the DVR restarts, click Yes to 
confirm the default resolution.

NOTE: If your system resolution is already 

in 1024 x 768, pressing and holding 
the Stop button will not restart the 
system.

You can increase or decrease the 
transparency of the on-screen menus.

Click the Output tab.

Drag the Transparency slider to adjust 
transparency.

Click Apply to save your settings.

If you connect your DVR to a BNC 
monitor, you can adjust the video 
margins.

NOTE: On the 16-channel model, you must 

select the BNC output mode to 
adjust the margins. Press 0 three 
times on the remote control to 
switch the output mode between 
BNC mode and VGA/HDMI mode. 
When BNC mode is selected, the 
mouse cursor appears on the BNC 
monitor.

Click the Output tab.

Click the Margin button.

Drag the sliders to the left or right to 
adjust the Left, Right, Top, or Bottom 
Margin.

Click Apply to save your settings and click 
OK to confirm.

A privacy zone allows you to block out 
up to 4 portions of each channel with a 
black square.

Click the Privacy Zone tab.

In the Channel drop-down menu, select 
the channel you wish to configure.

Configure the following:

• Channel: Select the channel you wish to 

configure.

Stop button (



)

: Areas covered by privacy 

zones are not visible in recordings.

Privacy Zone