Lorex Technology LH130 사용자 설명서

42

Using the Main Menu

In HTTP Port, enter the desired HTTP Port 
(default: 80).

Click Apply to save your settings.

Right-click to exit all menus. You will be 
prompted to restart.

You can adjust the data streaming rate 
(also called the SubStream) when you 
connect to the system remotely. If you 
want to conserve bandwidth, select a 
lower frame rate and bitrate. 

NOTE: Setting your system to stream with a 

lower frame and bitrate may cause 
the video to appear choppy or slow. 

Click the SubStream tab.

Configure the following beside the desired 
channel:

• Video: Select Enabled or Disabled. If you 

select Disabled, you will not be able to view 
the channel when connecting remotely to 
the system.

• FPS: Select the desired frames per 

second.

• Bitrate: Select the desired video bitrate.
• Audio: Select or deselect the checkbox to 

enable or disable the system from 
streaming audio when viewing the system 
remotely.

Click Apply to save your settings.

The system can send email notifications 
when it detects motion or when an 
alarm parameter triggers.

Click the Email tab in the Network menu.

From the Email drop-down menu, select 
from:

• Default: Uses the Lorex email server to 

send out alarm notifications. This is the 
recommended selection.

• Enable: Uses custom email server 

settings.

• Disable: Disables email notification.

In the Email drop-down menu, select 
Default.

In the Sender Email field, enter the email 
address of the sender. This can be any 
email address of your choice.

Select Default