Lorex Technology LH130 사용자 설명서

76

Remote Viewing Interface

Configure the Substream settings:

• Channel: Select the channel you wish to apply the settings to.
• Resolution: Select the desired recording resolution.
• FPS (Framerate): Select the desired recording frame rate. Note that higher frame rates 

require greater bandwidth consumption during remote viewing.

• Bit Rate: Select the desired video bit rate. 
• Audio: Select whether you want the system to record audio (audio cameras required, not 

included).

Click Save to apply your settings.

Click the Remote Setting tab, and click Network> Email 

In the Email drop-down menu, select Default to use the default Lorex email server 
(recommended) or select Custom to use your own custom SMTP email server.

In the Sender Email field, enter the email address of the sender. This can be any email 
address of your choice.

In the Receiver Email field, enter the email address you want the DVR to send alarm 
notifications to.

In the Interval drop-down menu, enter the Duration the DVR must wait before sending out a 
new notification. 


For example, if you select a 3 minute interval, the DVR will send out email notifications every 
3 minutes until the DVR stops detecting motion / alarm. The DVR will only send out 
notifications when it detects motion/alarm triggers.

Click Save to save your settings.

Configure the following: