Lorex Technology LH130 사용자 설명서
82
Remote Viewing Interface
2
Configure the following:
• Channel: Select the channel that the PTZ camera connects to.
• Protocol: Select the protocol of the PTZ camera*.
• Baud Rate: Select the baude rate of the PTZ camera*.
• Data Bit: Select the data bit rate of the PTZ camera*.
• Stop Bit: Select the stop bit rate of the PTZ camera*.
• Parity: Select the parity settings of the PTZ camera*.
• Cruise: Select Enable or Disable*.
• Address: Select the address of the PTZ camera*.
• Protocol: Select the protocol of the PTZ camera*.
• Baud Rate: Select the baude rate of the PTZ camera*.
• Data Bit: Select the data bit rate of the PTZ camera*.
• Stop Bit: Select the stop bit rate of the PTZ camera*.
• Parity: Select the parity settings of the PTZ camera*.
• Cruise: Select Enable or Disable*.
• Address: Select the address of the PTZ camera*.
*Consult the PTZ camera’s instruction manual for protocol and configuration details
3
Click Save to apply your settings.
Configuring the System Time and Date
To configure the system time and date:
1
Click the Remote Setting tab, and click System>General.
2
Configure the system format and time:
• System Time: Enter the desired system time and date. An on-screen calendar appears when
you click the date.
• Date Format: Select the desired format the date is displayed in.
• Time Format: Select between 12 hour or 24 hour time formats.
• Time Format: Select between 12 hour or 24 hour time formats.
3
Select DST to enable daylight savings time, or NTP to sync the time with a NTP time server.
NOTE: Using the NTP feature requires that your DVR have a constant Internet connection.
Changing the System’s Menu Time Out
To change the system’s time out menu:
1
Click the Remote Setting tab, and click System>General.
2
In the Menu Timeout drop-down menu, select the duration the menu stays on screen before
disappearing.
disappearing.
3
Click Save to apply your changes.