DMP Electronics XR500 사용자 설명서

12

ALARM        YES

This prompt displays when the Path Type is Primary.  All backup paths within the 

group follow the same programming for Alarm Reports.  Default is Yes.

 

 

 NO   YES   FIRE

When YES is selected, the following reports are sent to the receiver for all zone

types:

   

• Alarm

• Bypass

• Reset

• Restore

When FIRE is selected, the following reports are sent for Fire, Fire Verify and

Supervisory Zones:

   

• Alarm

• Bypass

• Reset

• Restore

 

SPV/TRBL    YES

This prompt displays when the Path Type is Primary.  All backup paths within the 

group follow the same programming for Supervisory/Trouble Reports. Default is Yes.

 

 NO   YES   FIRE

When YES is selected, the following reports are sent for all zone types:

• Trouble

• Low Battery  

• Missing

• Fault

• Restorals

• System Troubles

• System Restoral

When FIRE is selected, the following reports are sent for Fire, Fire Verify, and

Supervisory Zones:
• Trouble

• Low Battery  

• Missing

• Fault

• Restorals

• System Troubles

• System Restoral

O/C USER  NO  YES

This prompt displays when the Path Type is Primary.  All backup paths within the 

group follow the same programming for Opening/Closing and User Reports. Default

is Yes.

When YES is selected, the following reports by user are sent to this receiver.

• Opening

• Code changes (including adding, deleting, changing)

• Closing

• Schedule changes (temporary, permanent, shift)

• Bypass  

• Holiday date changes

• Reset

DOOR ACS    YES

This prompt displays when the Path Type is Primary.  All backup paths within the 

group follow the same programming for Door Access Reports. Default is Deny.

 

 NO  YES  DENY

Select YES to enable Door Access Granted and Denied reports to this receiver

whenever a door access is granted to a user. The Door Access Granted report is

only sent if the keypad number has also been selected in Access Keypads under the

SYSTEM REPORTS programming.
Note: To minimize cellular data, Door Access Granted reports are not sent on a CELL

path type.
Select DENY to enable Door Access Denied reports only to this receiver when a door 

access is denied to a user.  

SEND COMM TRBL: 

 

 

NO  YES  This prompt displays for each path and determines if and how communication 

trouble on the path is sent to the receiver.  A trouble message indicates both the 

path number and communication type that failed.  Default is Yes.

SEND PATH INFO: 

 

 

NO  YES  This prompt displays for each path and if YES, each panel message includes path 

information such as path number, communication type, and path type. Default is No.