DMP Electronics XR500 사용자 설명서

38

MENU DISPLAY

Menu Display allows you to select at which keypad addresses the user can access the 

following functions.  
To select a keypad, enter the device number (keypad address) using the digit keys

on the keypad. When a keypad is selected, an asterisk appears next to the keypad

address. Enter the number again to deselect the keypad. Press the COMMAND key

to display the next set of keypads (9 through 16). Refer to the Multiple Displays

section at the beginning of this document.

ARMED STATUS:

Enter the keypad addresses (1 through 16) that show the armed areas. The User

Menu Armed Areas function also displays the custom area name you enter in Area 

Information.
When only areas one to eight are used, the Armed Status display is 1 2 3 4 5 6 7 8.

When areas nine or higher are used the system Armed Status display reads ALL

SYSTEM ON or SYSTEM ON. Press the COMMAND key to display additional areas.

Refer to the Multiple Displays section at the beginning of this document and in the 

XR500 User’s Guide (LT-0683CAN).

TIME DISPLAY:

Enter the keypad addresses that can display the time and day of the week.

ARM/DIS DISPLAY:

Enter the keypad addresses from which users can arm and disarm areas.