Pelco es3012 사용자 설명서
Pelco Manual C306M-K (4/05)
23
DISPLAY DURATION
Display Duration programs the duration the Az/El, Direction, and Zoom labels are displayed
on the monitor. The available settings for display duration include the following:
on the monitor. The available settings for display duration include the following:
CONSTANT - The label is displayed continuously.
2 SECONDS (default) - The label is displayed for 2 seconds after PTZ functions
2 SECONDS (default) - The label is displayed for 2 seconds after PTZ functions
end.
5 SECONDS - The label is displayed for 5 seconds after PTZ functions end.
10 SECONDS - The label is displayed for 10 seconds after PTZ functions end.
10 SECONDS - The label is displayed for 10 seconds after PTZ functions end.
To program the display duration for the Az/El, Direction, and Zoom labels:
1.
Program preset 95 (28). The main menu appears.
2.
Position the cursor (>) beside Other.
3.
Press the Iris Open button to enter the Other menu.
4.
Position the cursor (>) beside Az/El/Direction.
5.
Press the Iris Open button to enter the Az/El/Direction menu.
6.
Position the cursor (>) beside Disp Duration.
7.
Press the Iris Open button. The cursor moves to the right.
8.
Move the joystick up or down to view the available selections.
9.
SELECT – Press the Iris Open button to make a selection.
CANCEL – Press the Iris Close button to cancel selection.
CANCEL – Press the Iris Close button to cancel selection.
Other Menu
Park Time
0
Pan/Scan Spd
7
Power Up
Default
Pat length
6 min
Spd Profile
50 MPH wind
<Zone Blank>
<Az /El/Direction>
Exit
<Az /El/Direction>
Exit
Az/El/Direction
Set Azimuth Zero
Az/El
Az/El Line
Direction
Direction Line
Disp Duration
Exit
MAIN MENU
<Limit Stop>
<Other>
EXIT
<Other>
EXIT