Pelco es3012 사용자 설명서
Pelco Manual C306M-K (4/05)
9
PAN AND TILT INSTALLATION
1
When installing the ES3012 Esprit
system, allow for sufficient clear-
ance between the top of the unit
and overhead obstructions. This will
prevent interference when the en-
closure is driven to its maximum el-
evation of 40 degrees.
system, allow for sufficient clear-
ance between the top of the unit
and overhead obstructions. This will
prevent interference when the en-
closure is driven to its maximum el-
evation of 40 degrees.
2
Remove the transformer module
from the base of the system by
loosening the four Phillips screws
and lifting the module.
from the base of the system by
loosening the four Phillips screws
and lifting the module.
3
Attach the base of the system to an
Esprit mount (EWM or EPP) with
the three flathead 10-32 x 1/2-inch
screws and washers (supplied).
Esprit mount (EWM or EPP) with
the three flathead 10-32 x 1/2-inch
screws and washers (supplied).
17.06
(43.33)
6.77
(17.20)
40°
8.30
(21.08)
4.67
(11.86)
NOTE:
The illustrations show
the ES3012 Esprit mounted
to an EWM wall mount.
to an EWM wall mount.
01475
BASE
MOUNTING
SCREWS
SCREWS
MOUNT
LOOSEN
PHILLIPS
SCREWS
PHILLIPS
SCREWS
TRANSFORMER
MODULE
MODULE
BASE