Pelco EM 2400 사용자 설명서
C267M-D (1/08)
3
SPECIFICATIONS
Pan Adjustment
360°
Tilt Adjustment
± 90°
Construction
Welded steel
Enclosure Mounting
Two 1/4-20 x 0.625 hex head machine screws (supplied)
Suggested Mounting Method
Secure to solid surface with three 1/4-inch or one 5/16-inch and
one 1/4-inch diameter fasteners (not supplied) for applications
where wall studs are encountered
one 1/4-inch diameter fasteners (not supplied) for applications
where wall studs are encountered
Maximum Load
20 lb (9 kg)
Unit Weight
2.75 lb (1.25 kg)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
Ø 0.28
(0.71), 3X
2.88
(7.32)
1.50
(3.81)
Ø 0.343
(0.87), 1X
3.00
(7.62)
11.25
(28.58)
10.75
(27.31)
3.50
(8.89)
5.09
(12.93)
2.84
(7.20)
3.00
(7.62)
1.50
(3.81)
1.73
(4.42)
3.47
(10.41)
Ø 0.50 (1.27)
Ø 0.272 (0.69), 7X
2.00
(5.08)
REVISION HISTORY
Manual #
Date
Comments
C267M-C
3/99
Revised to new format.
C267M-D
1/08
Replaced dimension drawing to illustrate new mounting head hole pattern per ECO 07-17992. Updated
to new format.
to new format.
Pelco, the Pelco logo, Camclosure, DigitalSENTRY, Endura, Esprit, ExSite, Genex, Intelli-M, Legacy, and Spectra are registered trademarks of Pelco, Inc.
Spectra III is a trademark of Pelco, Inc.
Spectra III is a trademark of Pelco, Inc.
© Copyright 2008, Pelco, Inc.
DLP is a registered trademark of Texas Instruments Incorporated.
All rights reserved.
The materials used in the manufacture of this document and its components are compliant to the
requirements of Directive 2002/95/EC.
requirements of Directive 2002/95/EC.