Motorola BLINK1-R 사용자 설명서
created by: Pro. Q.C. Systems Design Limited
30
31
4.7 Adding another Camera:
Working with iPhone
®
/iPad
®
Follow the same steps as under
3.3 User Account and
Camera Setup, Working with iPhone
®
/iPad
®
.
5. Procedure for resetting the Camera
Note: If your camera is moved from one router (e.g. home) to
another router (e.g. office) or you have camera setup issues,
then this camera must be reset again, and then the camera set
up again for devices for Android
TM
or iPhone
®
/iPad
®
.
1. Switch the ON/OFF switch to ON.
2. Press and hold the RESET button on the underside of
2. Press and hold the RESET button on the underside of
the camera for 5 seconds, until you hear a beep sound.
3. Release the RESET button and wait for the camera to
complete the internal reset procedure.
4. After about 60 seconds you will hear two short beeps and
the green LED starts blinking.
• Please be patient, it may take a few minutes until your camera
appears in your Wi-Fi
®
devices list, or is added to your account.
Adding another Camera: Working with iPhone
®
/iPad
®
30
Procedure for resetting the Camera
31
ENGLISH
Tap
Cameras to return to the Camera list.
Tap on to add another camera to the list.
• Tap on
Edit:
• Tap
Remove to take a camera off the list.
• Tap
Rename to give a camera a new name.
• Tap
Alert Settings to receive notifications if a noise is
detected or the temperature in your baby’s room is too high
or too low.
• If you use Alert Settings, under Settings on your iPhone
®
/
iPad
®
, select
Notifications > Baby Cam > Notification Center
ON.
• Select your preferred Alert Style and return to the application
and tap
Done.
• Tap
Cancel to return to the camera list.
• Tap on
Account to change the password.
• Tap on
Logout to leave the account.
BLINK1_USA_V3_2013_04_18.indd 30-31
18/4/13 2:09 PM