Pelco SD5AM 사용자 설명서
18
Pelco Manual C2419M-A (5/00)
PARK TIME MINUTES
This feature causes the dome to park at preset 1 after a programmed number of minutes of
control inactivity. The time can be set from 1 minute to 720 minutes (12 hours), or it can be set
to zero, which disables this feature.
control inactivity. The time can be set from 1 minute to 720 minutes (12 hours), or it can be set
to zero, which disables this feature.
To change the park time:
1.
1.
Program preset 95 (28). The main menu appears.
2.
Position the cursor (>) beside Other.
3.
Press the Iris Open button to enter the Other menu.
4.
Position the cursor (>) beside Park Time Minutes.
5.
Press the Iris Open button. The cursor moves to the right, beside the current park time.
6.
Move the joystick up or down to change the park time.
7.
SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.
CANCEL - Press the Iris Close button if you do not want to change the setting.
NOTE:
Preset 1 must be
programmed for the dome to
park.
park.
Main Menu
<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
Other Menu
Auto flip
On
Proportional pan
On
Limit stops
On
Park time minutes
0
Scan speed deg/s
25
Pattern length
6 min
Exit
LOWLIGHT LIMIT (Color Camera Only)
NOTE:
Auto focus is auto-
matically turned off when
the shutter time is longer
than 1/8 of a second.
the shutter time is longer
than 1/8 of a second.
NOTE:
LOWLIGHT does
not mean NO LIGHT. Some
type of illumination is
required (street light, IR
light, etc.)
type of illumination is
required (street light, IR
light, etc.)
This setting determines the maximum length of time the shutter will remain open automatically
in low light conditions. There are six choices:
in low light conditions. There are six choices:
2 = 1/2 second
8 = 1/8 second
30 = 1/30 second
4 = 1/4 second
15 = 1/15 second
60 = 1/60 second
To change the LowLight setting:
1.
1.
On the main menu, move the joystick up or down to position the cursor (>) beside Camera.
2.
Press the Iris Open button to enter the Camera menu.
3.
Position the cursor (>) beside Next.
4.
Press the Iris Open button to go to the Next menu.
5.
Position the cursor (>) beside LowLight limit.
6.
Press the Iris Open button. The cursor moves to the right, beside the current LowLight limit.
7.
Move the joystick up or down to choose the LowLight limit.
8.
SELECT – Press the Iris Open button to select your choice.
CANCEL – Press the Iris Close button if you do not want to change the setting.
CANCEL – Press the Iris Close button if you do not want to change the setting.
Main Menu
<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
Camera Menu
Backlight comp
Off
Zoom limit
x- -
Reset camera
<Gain/AGC>
<Auto-iris>
<Next>
Exit
<Gain/AGC>
<Auto-iris>
<Next>
Exit
Next Menu
LowLight limit
2
Shutter speed
Auto
Auto focus mode Auto
<Sharpness>
<White balance>
Prev (back to prev. menu)
Exit
<Sharpness>
<White balance>
Prev (back to prev. menu)
Exit