Pelco SD5AM 사용자 설명서
Pelco Manual C2419M-A (5/00)
21
RESET CAMERA
Main Menu
<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
Camera Menu
Backlight comp
Off
Zoom limit
x- -
Reset camera
<Gain/AGC>
<Auto-iris>
<Next>
Exit
<Gain/AGC>
<Auto-iris>
<Next>
Exit
Resetting the camera returns the settings to their defaults.
Default Settings
Spectra II
Spectra II
LowLight Color
Monochrome
Backlight comp
Off
Off
Zoom limit
X128/X176
X128
Gain/AGC
AGC mode
Auto
Auto
Gain
0
0
Auto-iris
Mode
Auto
Auto
Level
110
110
Peak
16
16
Low light limit
2
N/A
Shutter speed
Auto
Auto
Auto focus mode
Auto
Auto
Auto sharpness
On
On
Sharpness
13
13
White balance
Auto white bal
On
N/A
R-B white bal
No default
N/A
M-G white bal
No default
N/A
When the camera is reset, the following settings are not changed: park time, auto flip
disable, limit stops, zoom limit, and proportional panning.
disable, limit stops, zoom limit, and proportional panning.
Turning off power to the Spectra II dome does not reset the camera. Camera settings are
retained in memory. When the power is turned back on, the settings will be the same as
they were when the power was turned off.
retained in memory. When the power is turned back on, the settings will be the same as
they were when the power was turned off.
To reset the camera:
1.
1.
Program preset 95 (28). The main menu appears.
2.
Position the cursor (>) beside Camera.
3.
Press the Iris Open button to enter the Camera menu.
4.
Position the cursor (>) beside Reset Camera.
5.
Press the Iris Open button to reset the camera.