Magellan MG-6160 사용자 설명서
Magellan - X10 Operation User Guide
4
3. Select the desired House Code. Within this menu, you can perform any of the following options:
•
Press the left [
ACTION
] key (ok) to select and save the present House Code. Pressing this key will
also exit you from the House Code menu.
•
Press the center [
ACTION
] key (next) to scroll through the available House Codes (from A to P).
•
Press the right [
ACTION
] key (exit) to exit the screen and to return to the previous screen.
X10 Programming
Magellan offers a variety of programming choices for your X10 outputs (receivers). The X10 outputs can be programmed to follow a time
schedule or a specific event. You can select all X-10 outputs to be affected at the same time or select specific X10 outputs to be affected.
schedule or a specific event. You can select all X-10 outputs to be affected at the same time or select specific X10 outputs to be affected.
X10 Activation/Deactivation On Time
This programming option configures the X10 outputs to activate or deactivate by following a daily time
schedule. There are two time schedules that can be programmed. To configure the X10 outputs with this
feature:
schedule. There are two time schedules that can be programmed. To configure the X10 outputs with this
feature:
1. Access the X10 Setup menu (see “Accessing the X10 Setup Menu” on page 2).
2. Press the left [
ACTION
] key (ok) to program Magellan’s X10 On Time feature.
3. Press the left [
ACTION
] key (ok) to program the first time schedule.
4. Depending on the time format being used within the system (see the Magellan Reference and
Installation Manual), enter the time you wish the first time schedule to take effect and then press the
left [
left [
ACTION
] key (ok) to save and continue.
5. Configure the X10 outputs you wish to activate or deactivate with the schedule and then press the
right [
ACTION
] key (exit). See “Enabling/Disabling the X10 Outputs” on page 2 for more information.
6. Press the left [
ACTION
] key (ok) to program a second time schedule.
7. Depending on the time format being used within the system (see the Magellan Reference and
Installation Manual), enter the time you wish the second time schedule to take effect and then press
the left [
the left [
ACTION
] key (ok) to save and continue.
8. Configure the X10 outputs you wish to activate or deactivate with the schedule and then press the
right [
ACTION
] key (exit). See “Enabling/Disabling the X10 Outputs” on page 2 for more information.
12-hour clock format
24-hour clock format
12-hour clock format
24-hour clock format