VIVOTEK FD8164 사용자 설명서

 

 

Pin

Name

+ 

Digital Input +

-

Digital Input -

This Network Camera provides a general I/O terminal block which is used to connect 

external input / output devices. The pin definitions are described below. The 24V AC can 

be used as an alternate power source. 

The reset button is used to reset the system or restore the factory default settings. 

Sometimes resetting the system can return the camera to normal operation. If the system 

problems remain after reset, restore the factory settings and install again.

Reset: Press and release the recessed reset button with a straightened paper clip. Wait for 

the Network Camera to reboot.

Restore: Press and hold the recessed reset button until the status LED rapidly blinks. Note 

that all settings will be restored to factory default. Upon successful restore, the status LED 

will blink green and red during normal operation.

This network camera is compliant with 

Micro SD/SDHC/SDXC 16GB / 8GB and other 

preceding standard SD cards.