VIVOTEK FD8164 사용자 설명서

 

 

Network: This rule allows the user to assign a network address and corresponding subnet mask to 

the Allow/Deny List. The address and network mask are written in CIDR format. 

For example: 

Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List. 

Note: This rule only applies to IPv4 addresses.

For example:

Always allow the IP address to access this device: You  can  check  this  item  and  add  the 

Administrator’s IP address in this field to make sure the Administrator can always connect to the 

device.

IP address range 192.168.2.x will be bolcked.

There are three types of rules:

Single: This rule allows the user to add an IP address to the Allowed/Denied list. 

For example:

192.168.2.1

If IPv6 filter is preferred, you will be prompted by the following window. Enter the IPv6 address and 

the two-digit prefix length to specify the range of IP addresses in your configuration.