VIVOTEK FE8171V 사용자 설명서

 

 

■ Disconnect: If you want to break off the current connections, please select them and click this 

button. Please note that those checked connections will only be disconnected temporarily and will 

automatically try to re-link again (IE Explorer or Quick Time Player).

Enable access list filtering: Check this item and click 

Save if you want to enable the access list filtering 

function. 

Filter type: Select 

Allow or Deny as the filter type. If you choose Allow Type, only those clients whose 

IP addresses are on the Access List below can access the Network Camera, and the others cannot 

access. On the contrary, if you choose 

Deny Type, those clients whose IP addresses are on the Access 

List below will not be allowed to access the Network Camera, and the others can access.

  

Then you can 

Add a rule to the following Access List. Please note that the IPv6 access list column 

will not be displayed unless you enable IPv6 on the Network page. For more information about 

Settings, please refer to Network > Enable IPv6 on page 62 for detailed information.

There are three types of rules:

Single: This rule allows the user to add an IP address to the Allowed/Denied list. 

For example: