Avaya 03-300430 사용자 설명서

The test passes if all four self-tests are successful. The test stops when any one of the self-tests 
fails.
This test aborts if an ISDN test call is in progress on the Maintenance/Test digital port when the 
test is requested, or if an ISDN test call is initiated while the Digital Port Sanity test is in 
progress.

1000

ABRT

One of the Maintenance/Test digital ports is busy with background 
maintenance.

1. Either wait for the port to become idle, or busyout both Maintenance/

Test digital ports on the Maintenance/Test circuit pack using busyout 
port location (02) and busyout port location (03).

2. Release the ports (if they were busied out) using release port 

location (02) and release port location (03).

3. Retry the command at 1-minute intervals up to 5 times.

4. If the test continues to abort, escalate the problem.

1002

ABRT

The system could not allocate time slots for the test. The system may be 
under heavy traffic conditions, or it may have time slots out-of-service due 
to TDM-BUS errors.

1. If the system has no TDM-BUS errors, and if not handling heavy 

traffic, repeat the test at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

1004

ABRT

The port was seized by a valid ISDN-PRI test call. Use list 

isdn-testcall to determine which call is using the port (from the M/T 

Port column). Wait for the test call to complete as indicated in the Start 

Time and Duration fields, or abort the test call with clear 

isdn-testcall grp#/mem#, where grp#/mem# is determined from 

the B-channel field of list isdn-testcall.

 1 of 3