Avaya 03-300430 사용자 설명서

1005

ABRT

Wrong circuit pack configuration to run this test. This error applies only to 
DS1 Interface circuit packs. It means the DS1 Interface circuit pack is 
providing timing for the system, and therefore, it cannot be reset without 
major system disruptions.

1. If the circuit pack needs to be reset, then set synchronization to 

another DS1 Interface circuit pack or to the IPSI or Tone-Clock circuit 
pack and try again. See 

1015

ABRT

Port is not out-of-service.

1. Busyout the circuit pack.

2. Execute reset board location again.

2100

ABRT

System resources required for this test are not available.

1. Retry the reset board location at 1-minute intervals up to 5 

times.

1

FAIL

The circuit pack failed to reset.

2

FAIL

The circuit pack failed to restart.

1. Execute reset board location again.
2. If the problem persists, replace the circuit pack.

PASS

The circuit pack initializes correctly.

1. Run the short test sequence.

 2 of 3