Avaya 03-300430 사용자 설명서

CAUTION:

Never do any of the following without first shutting down AUDIX. Follow the 
instructions on the TN566/TN2169 faceplate:

●

Remove EMBEDDED AUDIX circuit packs

●

Cycle power to a carrier containing EMBEDDED AUDIX circuit packs

●

Remove power to a carrier containing EMBEDDED AUDIX circuit packs

The ADX16A-PT MO represents a port on a TN566/TN2169 EMBEDDED AUDIX circuit pack 
that is operating in control-link (CL) mode. For circuit-pack-level problems (ADX16A-BD or 
ANL-16-BD), see 

on page 2539. For 

port-level problems with AUDIX operating in digital-port mode, see:

●

●

The tests described in this section apply only to switch-side maintenance that tests a circuit 
pack’s components related to the TDM-bus interface. The AUDIX system has an extensive 
maintenance strategy that is described in DEFINITY AUDIX System Release 3.2.4 
Maintenance, 585-300-110.
AUDIX resides on a combined pair of circuit packs: the TN566 Multifunction board (MFB) and 
the TN2169 Alarm board (ALB). Because of its size this combination occupies 5 slots, but only 1 
slot is functional as far as the switch is concerned. The other 4 slots are seen by the switch as 
“AUDIX-reserved” slots.
In CL mode the TN566 pack supports up to 16 voice ports. When a call to a station with an 
AUDIX login is not answered, AUDIX answers the call using one of the available voice ports.
Unlike other AUDIX systems, EMBEDDED AUDIX is not an adjunct.

ADXCL-PT 

or ADX16A-P

MIN

test port location l

AUDIX Analog Line/ Control Link

ADXCL-PT 

or ADX16A-P

WRN

test port location sh

AUDIX Analog Line/ Control Link