Avaya 03-300430 사용자 설명서
ATM-BCH (ATM B-Channel Trunk)
Issue 1 June 2005
515
Table 162: Test #256 Service State Audit Test
Error
Code
Code
Test
Result
Result
Description / Recommendation
1000
ABRT
Needed resources not available, port on a call or initializing
1. Run status trunk grp#/mem#.
2. Check the results of Test #255.
2. Check the results of Test #255.
1018
ABRT
Maintenance disabled
1. Enable maintenance by entering y in the Maintenance Tests field on
the change trunk-group screen.
1113
ABRT
Signaling link failed
1. Run status trunk grp#/mem#.
2. Check the results of Test #255.
2. Check the results of Test #255.
3. See
1114
ABRT
Signaling link in transitional state
1. Retry the command up to 5 times at 1-minute intervals.
1116
ABRT
Trunk not in Out-of-Service/Far-end state and country protocol other than 1
1117
ABRT
Service-state audit message outstanding
1. Wait 2 minutes, then try again.
2100
ABRT
Could not allocate needed resources
1. Retry the command up to 5 times at 1-minute intervals.
1113
FAIL
Signaling link failed
1. See
FAIL
Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
PASS
PASS
1. Wait 4 minutes, then check the Error Log for any new Error Type 3073.
●
If there are none, both sides of the ISDN connection agree on the
service state. The negotiation succeeded.
service state. The negotiation succeeded.
●
If there is a new 3073 error, then the negotiation failed (the request
timed out).
timed out).